Attaching The Cover To The Surround Amplifier - Sony S-master WAHT-SBP1 Manual De Instrucciones

Note
• If you perform the pairing operation between the
surround amplifier and another S-AIR main unit,
sound transmission established by the ID is
canceled.
• Pairing will not be canceled unless you change
the ID setting.
Tip
• To press the PAIRING button, a slim instrument,
such as a paper clip, can be used.
Attaching the cover to
the surround amplifier
After connecting and setting, you can attach
the cover to the surround amplifier to
organize and store excess speaker cords.
1
Attach the speaker cord cover by
sliding it down along the grooves
on the edges of the surround
amplifier.
Surround
amplifier
Push the speaker cord cover down until
you hear a click. Turn the surround
amplifier upside down, and store the
cords in the speaker cord cover.
Speaker cord cover
Grooves
2
Insert the tabs of the speaker
cord holder in the slots of the
speaker cord cover, and press it
into place.
Surround
amplifier
m
Speaker cord holder
11
GB