TCL Sweeva 6000 Guia De Inicio Rapido página 16

VOICE PROMPT
The cliff sensor is blocked.
Please wipe it.
The laser sensor is blocked.
Please wipe it.
A forbidden zone is detected. Please
move the machine to a new position and
restart it.
The battery is too low, and the system
will shut down automatically.
Please clean and replace the
dust bag in the bucket.
The dust bag is not installed.
Please install the dust bag
before starting dust collection.
The dust bag has been taken out, so
dust collection is suspended
Please put back the dust box.
For additional support, please contact our Customer Advocacy group at 877-300-9806.
SOLUTIONS
The cliff sensor is blocked. Please wipe it
with a soft, dry cloth.
The laser ranging sensor is blocked.
Please clear the blockage. Reflective
environments, such as metal mirrors, will
also affect the normal operation of the
laser ranging sensor. So please move the
machine to a new position and restart it.
The machine is too close to the
forbidden zone at the time of startup.
Please move the machine to a new
position and restart it.
Put the machine back on the charging
base to charge.
Please replace the dust bag with a new
one.
Please install the dust bag correctly
Please reinstall the dust bag.
Please reinstall the dust box and filter
and ensure they are installed properly,
then start cleaning again.