Coby CHBT590 Manual De Instrucciones página 4

Charging Your Head Phones
Connect one end of the provided Micro USB cable to the
Headphones and the other to a power source. While the
Headphones are charging the LED indicator light will turn
red. When it's fully charged the light will turn off.
Powering On & Off
Power On: Press hold and release the "Power" button to
turn the headphones on. The user will briefly see a solid
blue light and hear a tone means "Bluetooth
Power Off: Press hold and release the "Power" button to
turn the headphones off. The user will see the LED
Indicator flash red and hear a tone means "Power Off".
Connecting via Bluetooth
After powering on and hearing the "Bluetooth® Mode"
prompt tone, the Headphones LED indicator will begin
alternating between blue and red, indicating that the
headphones are waiting to pair. To pair with it, open your
Phone Bluetooth settings and look for "CHBT590" on the
list of nearby devices and tap the name to pair. The user
will hear a tone means "Connected" and see the LED
indicator turn solid blue. This indicates that the devices
have been successfully paired. The headphones will
automatically connect with your smart-phone the next time
they're both on, in range, and in pairing mode.
Note: You can use the provided AUX cable to listen to
music without using Bluetooth.
Phone Commands
• Answer Call: When you receive an incoming call the
user will hear a tone.
OPERATION
To answer, press the
Mode."
®
4