BraunAbility Carobrake Instrucciones De Instalación & Modo De Empleo página 14

14
Carobrake
Installation
Presentation
Carobrake tensions the vehicle's original parking brake cable. Note that performance
deteriorates if the product's cable is installed bent. Carobrake replaces the function
of the handbrake lever and should not be used in combination with it. The actuator
itself can be fitted in or under the vehicle, depending on the prevailing circumstances.
Carobrake has been tested and approved for handling 30,000 cycles with a 5-minute
rest between each cycle.
Ensure the force is sufficient for the intended type of vehicle, fitting and use before
installation.
Stroke length
Cable length
Optimum force with straight cable *1600N / 4A
Fuse
*Deviation: +/- 10% at +25 °C
1600N
50
700
10A
2200N
50
700
*2200N / 4A
10A