BraunAbility Carobrake Instrucciones De Instalación & Modo De Empleo página 18

18
Carobrake
Operation
Carobrake replaces the function of the handbrake lever and should not be used in
combination with it.
To apply the parking brake
Press the switch to activate Carobrake. The lamp in the switch lights up straight away
but there will be a 5 - 15 second delay before the parking brake is applied.
To release the parking brake
Press the switch to deactivate Carobrake. The lamp in the switch goes out straight
away but there will be a 5 - 15 second delay before the parking brake is released. Do
not put the vehicle in motion before the parking brake is released.
The Carobrake switch is locat-
ed in the driver's area.
• The product documentation shall always accompany the vehicle for an MOT inspection.
• Always contact your installer when dismantling.