Uline H-7571 Instrucciones De Montaje

H-7571, H-7572
MOBILE WIDE
SPAN RACK
TOOLS NEEDED
10mm Wrench
Caster x 4 Locking Nut x 32
NOTE: Shelving
unit assembly
instructions
included with
wide span beams/
supports.
NOTE: When
installing casters,
supports should be
placed one rivet up
from bottom of posts. (See Figure 1)
TO ATTACH CASTERS TO
BASE PLATES
1. Align caster plate with the
holes in bottom of base plate.
2. Attach swivel casters with
nuts, bolts and washers.
(See Figure 2)
PAGE 1 OF 3
1-800-295-5510
uline.com
Phillips Screwdriver
Bolt x 32
Figure 1
PARTS
Washer x 32
ASSEMBLY
TO MOUNT BASE PLATES TO WIDE SPAN RACK
1. Line up holes of left base plate with bottom of the
left wide span post.
2. Attach left base plate and caster to post with nuts,
bolts and washers using the top and bottom holes of
the base plate on each side. (See Figure 3)
3. Repeat step two for the remaining base plates.
NOTE: Be sure to use right base plates for the
right posts.
Figure 2
Para Español, vea página 2.
Pour le français, consulter la page 3.
Left Base Plate x 2 Right Base Plate x 2
Figure 3
1120 IH-7571