Before You Begin - Kohler K-13931 Manual Del Usuario

2-1/4" (5.7 cm)
Min.
3" (7.6 cm)
Max.
1-3/4"
(4.4 cm)
1/2" N.P.T.
1-3/4"
(4.4 cm)
K-13938
2-5/16" (5.9 cm) D.
2-1/2" (6.4 cm) D.

Before You Begin

CAUTION: Risk of property damage. To support the bedpan
washer and piping, provide sufficient reinforcement or mounting
brackets as required inside the wall.
NOTE: Refer to the roughing-in diagram for dimensional
information.
Shut off the main valve and water supply.
Observe all local plumbing codes and building codes.
Plumb using 1/2" NPT pipe or 1/2" copper tubing, elbows, and
adapters. Secure the piping to reinforcements in the wall.
Do not remove plastic thread protectors until instructed.
Kohler Co. reserves the right to make revisions in the design of
bedpan washers without notice, as specified in the Price Book.
Kohler Co.
K-13931
4"
(10.2 cm)
Spray
2-5/16"
(5.9 cm) D.
2-1/2"
(6.4 cm) D.
4"(10.2 cm)
1/2" Supply
Valve
2-1/2" (6.4 cm) D.
8" (20.3 cm) Optional
1/2" Supply
Valve
3
1/2" Supply
Valve
2-1/2"
(6.4 cm) D.
8" (20.3 cm)
1/2" Supply
Valve
1034409-2-A