Kohler K-13931 Manual Del Usuario página 7

Nut
Union
Joint
3. Install the Vacuum Breaker
NOTE: Apply a thread sealant where applicable.
Rotate the nut and union joint counterclockwise until they are
removed from the vacuum breaker assembly.
Slide the nut with threads facing out, half way down the supply
nipple.
Thread the union joint onto the supply nipple.
Thread the vacuum breaker assembly onto the union joint until
tight. Ensure that the vacuum breaker assembly is vertically
aligned.
Slide the nut onto the vacuum breaker assembly and thread until
tight.
Rotate the vacuum breaker clamp to point straight out from the
left side of the vacuum breaker assembly. Secure with a screw.
Kohler Co.
Vacuum
Breaker
Assembly
Supply
Nipple
Clamp
7 1034409-2-A