Worx MAKER X WX747 Manual Original página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
could cause injury.
f) Before using, always visually
inspect to see, that the
fasteners are secure, the
housing is undamaged and
that guards and screens
are in place. Replace worn
or damaged components
EN
in sets to preserve balance.
8
Replace damaged or
unreadable labels.
3) Operation
a) Keep your face and body
away from the feed intake
opening.
b) Do not allow hands or any
other part of the body or
clothing inside the feeding
chamber, discharge chute,
or near any moving part.
c) Keep proper balance and
footing at all times. Do not
overreach.
d) Always stand clear of the
discharge zone when
operating this machine.
e) If the machine should start
making any unusual noise or
vibration, immediately shut
off the power source and
allow the machine to stop.
Remove the battery pack
from the machine and take
the following steps before
restarting and operating the

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Maker x wx747.x

Tabla de contenido