Worx MAKER X WX747 Manual Original página 9

machine:
i) inspect for damage;
ii) replace or repair any
damaged parts;
iii) check for and tighten any
loose parts.
f) If the machine becomes
clogged, shut-off the
power source and remove
the battery pack from the
machine before cleaning
debris.
g) Never operate the machine
with defective guards or
shields, or without safety
devices.
h) Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
i) Do not transport this
machine while the power
source is running.
j) Always disconnect the
machine from the power
supply (e.g. remove the
battery pack from the
machine)
- whenever you leave the
machine,
- before clearing blockages
or unclogging chute,
- before checking, cleaning
or working on the machine.
k) Avoid using the machine
EN
9