3.5G Module; G Module (Optional) - NEO Vivid V2120 Guia Del Usuario Concisa

3.5G Module

If you have included an optional 3.5G module in your
purchase option, follow the instructions below to install
the USIM card (which will be provided by your service
provider), and then install the application.
Power Safety Warning
Before you undertake any installation procedures, make
sure that you have turned off the power, and disconnected
all peripherals and cables (including telephone lines). It is
advisable to also remove your battery in order to prevent
accidentally turning the machine on.
1. Turn off the computer, and turn it over and remove the
battery.
2. Locate the hard disk bay cover and remove screws
.
2
3. Remove the hard disk bay cover
4. Grip the tab and slide the hard disk in the direction of
arrow 4 to remove it.
All manuals and user guides at all-guides.com
5.
6.
1 &
.
3
Concise User's Guide
1
2
Figure 11 - Hard Disk Removal
Insert the USIM card as you would into your mobile phone.
The 3.5G module 5 is pictured on the left, and the
installed USIM card 6 on the right in
5
Figure 12 - Module & USIM Card Location
3
4
Figure 12.
6
3.5G Module - 27