Bluetooth Configuration In Windows Vista; Setup Your Bluetooth Device So The Computer Can Find It; To Turn The Bluetooth Module On; To Add A Bluetooth Device - NEO Vivid V2120 Guia Del Usuario Concisa

Concise User's Guide
Bluetooth Configuration in
Windows Vista
Setup your Bluetooth Device so the
Computer Can Find it
1. Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on.
2. Make the device discoverable (to do this check your
device documentation).

To Turn the Bluetooth Module on

1. Press the Fn + F12 key combination to power on the Blue-
tooth module.
2. A Bluetooth icon will appear in the taskbar
sidebar).
3. You can then do any of the following to access the
Bluetooth Devices control panel.
• Double-click the icon
control panel.
• Click Start, and click Control Panel (or point to Settings
and click Control Panel), and then click Bluetooth
Devices (Hardware and Sound).
• Click/Right-click the icon
the menu.

34 - Bluetooth Configuration in Windows Vista

All manuals and user guides at all-guides.com
(see
to access the Bluetooth Devices
and choose an option from
Figure 23 - Bluetooth Devices & Click Icon Menu

To Add a Bluetooth Device

1. Access the Bluetooth Devices control panel.
2. Click Options (tab), and make sure that Allow Bluetooth
devices to connect to this computer check box
(Connections) has a tick inside it.
3. Click Devices (tab), and then click Add.
4. The Add Bluetooth Device Wizard will appear.
Bluetooth Taskbar
Icon
If you cannot see the
Bluetooth icon in the
taskbar, access the
Bluetooth Devices con-
trol panel. Click Options
(tab), and make sure that
Show Bluetooth icon
in the notification area
check box has a tick in-
side it.