Troubleshooting - NEO Vivid V2120 Guia Del Usuario Concisa

Concise User's Guide

Troubleshooting

Problem
The DVD regional codes
can no longer be changed.
The TouchPad doesn't
work.
The Wireless LAN/
Bluetooth/3.5G modules
cannot be detected.
The PC Camera module
cannot be detected.
The Wireless LAN/ 3.5G
or PC Camera modules
cannot be configured.
The captured video files
from the PC Camera are
taking up too much disk
space.
36 - Troubleshooting
All manuals and user guides at all-guides.com
The code has been changed the maximum 5 times. See
page 13.
The Touchpad has been disabled. Press the Touchpad toggle (Fn + F1) key combination (make
sure you have installed the Touchpad driver.
The modules are off. Check the LED indicators
module is on or off. If the LED indicator is off, then press the Fn + F11 (WLAN), Fn + F12
(Bluetooth) or Fn + (3.5G) key combination(s) in order to enable the modules.
The module is off. Press the Fn + F10 key combination in order to enable the module. Run the
BisonCap/VideoView program to view the camera picture.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module.
Note that capturing high resolution video files requires a substantial amount of disk space for
each file.
Note that the Windows Vista system requires a minimum of 15GB of free space on the C: drive
system partition. It is recommended that you save the capture video file to a location other than
the C:drive, limit the file size of the captured video or reduce video resolution (Options > Video
Capture Pin...> Output Size).
Possible Cause - Solution
"Changing DVD Regional Codes" on
/ to see if the WLAN/Bluetooth/3.5G