1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschi-
nen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much
enjoyment and success.
Note:
According to the applicable product liabil-
ity laws, the manufacturer of the device
does not assume liability for damages to
the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating in-
structions,
• Repairs by third parties, not by author-
ized service technicians,
• Installation
and
non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system
that occurs due to the non-compliance
of the electric regulations and VDE reg-
ulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the op-
erating instructions before installing and
commissioning the device.
The operating instructions are intended to
help the user to become familiar with the
machine and take advantage of its appli-
cation possibilities in accordance with the
recommendations.
18 | GB
replacement
of
The operating instructions contain im-
portant information on how to operate
the machine safely, professionally and
economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to
increase reliability and service life of the
machine.
In addition to the safety regulations in the
operating instructions, you have to meet the
applicable regulations that apply for the op-
eration of the machine in your country.
Keep the operating instructions package
with the machine at all times and store
it in a plastic cover to protect it from dirt
and moisture. Read the instruction man-
ual each time before operating the ma-
chine and carefully follow its information.
The machine can only be operated by
persons who were instructed concerning
the operation of the machine and who are
informed about the associated dangers.
The minimum age requirement must be
complied with.
In addition to the safety requirements in
these operating instructions and your
country's applicable regulations, you
should observe the generally recognized
technical rules concerning the operation
of woodworking machines.
We accept no liability for damage or acci-
dents which arise due to non-observance
of these instructions and the safety infor-
mation.
2. Device description
1. Handle
2. Machine head
3. Connection cable
4. Locking hooks
5. Castor mounts (4x)