Operation - Manupro MPASP4IN1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Vacuuming:
Connect the suction hose (14) to the suc-
tion hose port (9). To do so, slide the end
of the suction hose (14) with the two nip-
ples into the suction hose port (9) (A). In-
sert the two nipples into the recesses.
Once the suction hose is fully inserted,
turn it clockwise (B).
Blowing:
Connect the suction hose (14) to the suc-
tion hose port (12). Slide the end of the
suction hose (14) with the two nipples into
the blowing function connection port (12).
Insert the two nipples into the recesses. It
is not necessary to turn it here.
Installing the plastic extension tubes
(20), handle (20.1), suction hose (14)
and nozzle (18+19) (fig. M)
Wet and Dry vacuuming
Assemble the plastic extension tubes (20)
by pushing them together.
Connect the assembled plastic extension
tubes with the handle (20.1).
Fit the floor nozzle (18) or joint nozzle (19)
to the other end of the assembled plastic
extension tubes.
Ash cleaning
Connect the aluminium tube (22) with the
suction hose (14)

8. Operation

m WARNING!
Switch the device off if liquid or foam
emerges with the exhaust air during wet
vacuuming.
Switching on/off (fig. N)
The on/off switch (10) has two settings
• Switch setting 0: Off
22 | GB
• Switch setting I: On
Press the on/off switch (10) to switch on.
Switch setting I: On
Press the on/off switch (10) again to switch
the device off. Switch setting 0: Off
Dry vacuuming and ash cleaning (fig. I)
m WARNING!
The vacuuming of glowing embers and
of materials that are combustible, explo-
sive or harmful to health is prohibited.
There is a risk of injury!
Use the HEPA filter (17) for dry vacuuming
and ash cleaning. The paper filter bag (16)
can be used in addition. This ensures that
the HEPA filter (17) remains free of dust
for longer and maintains the vacuum pow-
er for longer.
In addition, the disposal of the dust is also
easier.
Always ensure that the filters are correctly
fitted.
Wet vacuuming (fig. H)
Use the foam filter (15) for wet vacuuming.
Ensure that the foam filter (15) is correctly
fitted.
If the stainless steel container (8) is full,
the safety float valve (13) closes the suc-
tion port and suction operation is inter-
rupted.
m WARNING!
The device is not suitable for vacuuming
flammable liquids. For wet vacuuming,
use the only the foam filter (15) provided.
To remove the liquid vacuumed up from
the stainless steel container, take off the
machine head (2) by releasing the locking
hooks (4) from the stainless steel contain-
er (8). Pour out the liquid residue.

Publicidad

Tabla de contenido
loading

Tabla de contenido