Scope Of Delivery; Intended Use; Safety Information - Manupro MPSOR255MM Manual De Instrucciones

3. Scope of delivery

• Sliding compound mitre saw
• 1 x Clamping device (7) (preassembled)
• 2 x Workpiece support (8) (preassembled)
• 1x saw blade 255x30x2,2x48T (preassembled)
• 1x saw blade 255x30x2,8x60T
• Chip collection bag (17)
• Allen key 6 mm (C)
• Allen key 3 mm (D)
• Operating manual

4. Intended use

The multifunction sliding cross cut mitre saw is de-
signed to crosscut wood, plastic, aluminium, copper
and metal (not exceeding 15 HRC), respective of the
machine's size. The sliding cross cut mitre saw is not
designed for cutting firewood.
Warning! Do not use the sliding cross cut mitre saw
to cut materials other than those specified described
in manual.
Warning! The supplied saw blade is intended exclu-
sively for sawing the following materials:
wood, wood derived products (MDF, chipboard, ply-
wood, blockboard, hardboard, etc.), wood with nails
and 3 mm mild steel plates.
Note: Wood containing non-galvanised nails or
screws can also be safely cut when carefully han-
dled.
Note: Do not use the saw blade to cut galvanised
materials or wood containing galvanised nails. Do
not use the saw blade to saw firewood!
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
The equipment is to be operated only with suitable
saw blades. It is prohibited to use any type of cut-
ting-off wheel.
To use the equipment properly you must also observe
the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in-
formed about the equipment's potential hazards. It is
also imperative to observe the accident prevention
regulations in force in your area. The same applies
for the general rules of health and safety at work.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
24 | GB
Even when the equipment is used as prescribed it is
still impossible to eliminate certain residual risk fac-
tors. The following hazards may arise in connection
with the machine's construction and design:
• Contact with the saw blade in the uncovered saw
zone.
• Reaching into the running saw blade (cut injuries).
• Kick-back of workpieces and parts of workpieces.
• Saw blade fracturing.
• Catapulting of faulty carbide tips from the saw
blade.
• Damage to hearing if ear-muffs are not used as
necessary.
• Harmful emissions of wood dust when used in
closed rooms.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the equip-
ment is used in commercial, trade or industrial busi-
nesses or for equivalent purposes.

5. Safety information

General power tool safety warnings
m WARNING Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flam-
mable liquids, gases or dust
Power tools create sparks which may ignite the
dust or fumes
c) Keep children and bystanders away while op-
erating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) pow-
er tools.
Unmodified plugs and matching outlets will re-
duce risk of electric shock.