Bonsaii C220-A Instrucciones De Operación página 16

Malfunction
The power plug doesn't be connected
or doesn't be connected well .
The voltage is too low or not
available .
The paper doesn't be put the position
of shredder feed opening .
Stop Working
The shredder is under protection
status for overheating .
The shredder is overloading .
The thickness of paper is too thin or
too transparent .
The basket doesn't be assembled
well .
Defictive of power line
The basket of shredder is full
Paper jam
Jam
Paper dust and other foreign objects
Keep Running
cover the sensor.
The shredder is placed on unsuitable
Loud Noise
place.
Reason
14
Solution
Please kindly check if you use the
shredder with related voltage . If yes ,
Please kindly plug in again .
Please kindly unplug the shredder and
refind related voltage to use the
shredder .
Please kindly refeed the paper into
the shredder feed opening .
Wait for the shredder to cool down .
Please kindly take out excess paper
and put the paper into the shredder
feed opening again .
Add an opaque paper or fold the
transparent paper by multiple .
Please kindly assembled the
shredder again .
Please kindly contact with us customer
service to replace new one for you .
Please kindly empty the basket in time.
Using the function of "Reverse" to pull
out the jam paper .
Please kindly unplug the shredder and
clean the dust or foreign objects.
Change location