To remove
• Simply lift the bin up and pull straight out.
• Tilt up the front of the drawer and pull it straight
out. Then, move the drawer slightly in the
direction of the arrow and pull it out of the
refrigerator. See the illustration below.
To re-install
• Insert the drawer into the frame rails, and then
push back into place.
• Slide each bin in above the desired location,
and then push down until it stops.
CAUTION
The drawers need to be removed before the glass
shelf above them can be lifted out.
DA68-03028A-02.indb 31
All manuals and user guides at all-guides.com
4. Flex Zone
- To remove the Flex Zone : Pull the pantry out
- To relocate the Flex Zone : Push the rails to
- To remove the divider : Pull the pantry
- To relocate the divider : Hook the back of the
Using the doors
Ensure that the doors close all the way and are
securely sealed.
When the refrigerator door is only partially open, it
will automatically close.
But, the door will stay open when opened more
than the auto close range and you must close it
manually.
English - 31
to full extension. Tilt up the front side of the
pantry and pull straight out.
the back of the refrigerator. Place the drawer
onto the rails and slide the pantry back until it
is in place.
completely out to full extension and raise the
front side of the divider to unhook it from the
rear wall of the pantry, then lift the divider out.
divider over the rear wall of the pantry and push
the divider down.
Divider
14. 6. 5.
1:25