Principle Of Operation; Installing The Appliance - STAMOS Soldering S-LS-6 Manual De Instrucciones

Any damage resulting from a non-conform use of the device is payable by the user!

PRINCIPLE OF OPERATION

1. airflow volume adjustment knob / switch between hot and
cold air
2. airflow volume indicator
3. memory buttons (saving entered parameters)
4. SMD rework gun cable
5. SMD rework gun switch on / off
6. soldering iron switch on /off
7. soldering iron smoke absorber switch on / off
8. smoke absorber pipe
9. soldering iron connection socket
10. SMD rework gun working indicator
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please contact your
transport company and distributor within 3 days, and document the damages as detailed as possible. Do not turn the
package upside down! When transporting the package, please ensure that it is kept horizontal and stable. Please keep all
packaging materials (cardboard, plastic tapes and styrofoam), so that in case of a problem, the device can be sent back to
the service centre in accurate condition.
Disposing of packaging
The various items used for packaging (cardboard, plastic straps, polyurethane foam) should be conserved, so that the de-
vice can be sent back to the service center in best conditions in case of problem!

INSTALLING THE APPLIANCE

Appliance location
The work surface where the device will be located must be suitable for the size of the appliance, please refer to the
measurements. The work surface must be levelled, dry, heat-resistant and at a fitting height from the ground to enable a
proper use of the device.
The power cord connected to the appliance must be properly grounded and correspond to the technical details.
EN
11. SMD rework gun temperature decreasing button
12. SMD rework gun temperature increasing button
13. SMD rework working mode (AUTO / MANUAL)
14. soldering iron temperature increasing button
15. soldering iron temperature decreasing button
16. soldering iron sleep time indicator
17. SMD rework gun temperature unit (Fahrenheit or
Celsius)
18. soldering iron temperature unit (Fahrenheit or Cel-
sius)
19. soldering iron working indicator
20. soldering iron temperature display
21. SMD rework gun temperature display
11