C. a
djUstIng the rInse aId dose
Note: If you use "2-in-1" or "3-in-1" detergents/tablets, you do not need additional
rinse aid. Refer to the information on the detergent packaging.
ATTENTION! Only use special dishwasher rinse aid.
Never fill the rinse aid dispenser with another product
(such as a cleaning agent or liquid detergent), as this
could damage the appliance.
The rinse aid dispenser has 6 settings:
- Position 1 = minimum dose
- Position 6 = maximum dose
Adjust the amount of rinse aid according to the water
•
hardness. Carry out an initial wash cycle with the dispenser in position 2. You will
then adapt the correct dose for your home.
Gradually increase the rinse aid dose if there are drops of water or traces of
•
limescale on the dishes after washing.
Reduce the amount if there are whitish, sticky streaks on dishes, glasses or knife
•
blades.
Note: If your water is soft, you may not need rinse aid, as it could form a white haze
on your dishes.
When should you refill the rinse aid dispenser?
If the "No rinse aid" indicator light
aid from the following information:
V.1.0
The rinse aid dispenser is located on the
inside of the door next to the detergent
dispenser.
Rinse aid prevents water from remaining
•
on the dishes in the form of droplets
leaving white spots after drying.
The rinse aid is added automatically
•
during the last rinse.
is not on, you can estimate the amount of rinse
42