Cooau CU-SPC05 Manual Del Usuario página 7

4. Time Lapse Video: Off/1 Sec. /5 Sec. /10 Sec. /30 Sec. /60 Sec.
Default setting is off.
Time Lapse Video creates video from frames captured at specific intervals.
This option lets you capture a time lapse event and immediately view or
share it as a video. Time Lapse Video is captured without audio.
5. Slow Motion: Off, 1080P/60FPS, 720P/120FPS
Default setting is off.
Slow motion is an effect in film-making whereby time appears to be
slowed down.
Note: If you use Slow Motion function, EIS will be turned off automatically.
Slow motion video is captured without audio.
6. Audio Record: On/Off
Default setting is on.
Turn off Audio Record, the camera does not record audio when you
record video.
PHOTO SETTING
1. Photo Resolution: 20M/16M/12M/8M/5M
Default setting is 16M.
2. Self-timer: Off/2 Sec. /5 Sec. /10 Sec.
Default setting: Off.
The camera will automatically take one picture after the time interval
you set after you press OK button once.
3. Burst Photo: Off/3 Photos/5 Photos
Default setting is off.
Burst captures up to 5 photos in 1 second, so it is perfect for capturing
fast-moving activities.
Note: Burst Photo only support the photo resolution of 12M/8M/5M,
do not support the photo resolution of 20M/16M.
09
GENERAL SETTING
1. Volume: 0-10
Default setting is 5.
Press Up button to turn up the volume.
Press Down button to turn down the volume.
2. Beep: On/Off
Default setting is on.
Sets the volume of your camera's alerts.
3. Exposure: 2/1.7/1.3/1/0.7/0.3/0/-0.3/-0.7/-1/-1.3/-1.7
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want
the camera to prioritize when determining exposure. This setting is
particularly useful in shots where an important region might otherwise
be over-or underexposed.
When you change this setting, the LCD display immediately shows you
the effect on your image. If you change modes, the camera returns to
using the entire scene to determine the correct level of exposure.
4. White Balance: Auto/Daylight/Cloudy/Fluorescent/Incandescent
Default setting is auto.
White Balance lets you adjust the color temperature of videos and photos
to optimize for cool or warm lighting conditions. When you change this
setting, the LCD display immediately shows you the effect on your image.
5. ISO: Auto/100/200/400/800/1600/3200
ISO determines the camera's sensitivity to light, and creates a trade-off
between brightness and resulting image noise. Image noise refers to the
degree of graininess in the image.
10