Using A Power Supply Unit; System Settings - Welby ABO 523 Manual Del Usuario

System settings

− Make sure the polarity of the batteries
(+ or –) is correct.
1. Open the battery compartment
battery compartment cover
2. To replace the batteries
Insert 4 batteries (size AA) in the battery compartment.
3. Close the battery compartment by replacing the battery
compartment cover.

Using a power supply unit

The blood pressure monitor can also be operated
with a power supply unit (not included in the
package contents). A medical power supply unit
(DC 6.0 V, 600 mA) is recommended for use. The
adapter connection pin must be positive inside and
negative outside with a 0.08" (2.1 mm) coaxial joint.
1. Connect the output plug of the power supply unit
(not provided) to the power plug jack
2. Connect the power supply unit to an outlet.
System settings
The system settings allow you to select users, and set date,
time and time format.
1. Push the SET button
A user icon ( or )
2. Push the M button
This allows up to two users to save and accumulate the test
results (60 memory slots per user).
18
All manuals and user guides at all-guides.com
5
12
, remove the old batteries first.
4
.
14
will show on the display
2
to select either user icon 1 or user icon 2.
6
by removing the
.
8
.
1
.