Installing Or Replacing Batteries; Using A Power Adaptor - Welby ABO 523 Manual Del Usuario

Installing or replacing batteries

NOTICE!
Risk of damage!
Incorrect battery installation may damage
the blood pressure monitor.
− Pay attention to the correct battery
polarity (+ or -).
1. Open the battery compartment
battery compartment door
2. For battery replacement, remove the old batteries
first. Insert 4 batteries
compartment.
3. Close the battery compartment by replacing the
battery compartment door.

Using a power adaptor

The blood pressure monitor can also be
powered by a power adaptor (not provided).
A medical power adaptor (DC 6.0 V, 600 mA)
is recommended for use. The adaptor
connection pin must be positive inside and
negative outside with a 0.08 inch (2.1 mm)
coaxial joint.
1. Connect the output plug of the power adaptor (not
provided) to the power adaptor jack
2. Connect the power adaptor to a socket.
AFTER SALES SUPPORT
(size AA) into the battery
12
815-342-5850
USA
First use
by removing the
6
.
5
.
8
USA
19