Rockwell Automation Allen-Bradley 140G-G Instrucciones De Instalación
Ocultar thumbs
Ver también para Allen-Bradley 140G-G:
- Manual de instrucciones (10 páginas) ,
- Instrucciones de instalación (5 páginas) ,
- Instalación (3 páginas)
Publicidad
Enlaces rápidos
140G-G_ ; 140MG-G_
Installation instruction for 140G-G, 140MG-G
Istruzioni di installazione
Installationsanleitung
Instructions pour l'installation
Instrucciones de instalación
Installation - Installazione - Instalación
Instalação -
WARNING:
To prevent electrical shock, disconnect from power source before
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA: Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vor Installations- oder Servicearbeiten Stromversorgung zur
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
AVERTISSEMENT:
Avant le montage et la mise en service, couper l'alimentation
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA: Desconéctese de la corriente eléctrica, antes de la instalación o
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO: Para evitar choques, desconectar da corrente elétrica antes de fazer a
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
4.6mm (0.18")
3p
4p
DIR 1000719R0001 (L4099)
-
73mm (2.87")
x2
x4
x3
x6
CLACK
12mm (0.47")
14mm (0.55")
x6
x2
x8
x2
Bul. 140G/140MG
x2
x2
Publicidad
Manuales relacionados para Rockwell Automation Allen-Bradley 140G-G
Resumen de contenidos para Rockwell Automation Allen-Bradley 140G-G
- Página 1 Bul. 140G/140MG 140G-G_ ; 140MG-G_ Installation instruction for 140G-G, 140MG-G Istruzioni di installazione Installationsanleitung Instructions pour l’installation Instrucciones de instalación Installation - Installazione - Instalación Instalação - WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep free from contaminants. (Follow NFPA70E requirements).
- Página 2 Maximum reccomanded support distance Use cable or insulated busbars/ or perform specific type test on the installation. Usare cavi o barre isolate/ o eseguire prove di tipo specifiche sull' installazione. Kabel oder isolierte Sammelschienen verwenden / oder die spezifische Typprüfung auf derInstallation durchführen.
- Página 3 Mandatory with door of the panel ≤ 25mm/0.98" from the front 140G-G THERMOMAGNETIC TRIP UNIT Type Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed In=100A Fixed I1(A) I3(A) Fixed 1000 Fixed 1000 Fixed 1100 Fixed 1250 Type Adjustable 160*...
- Página 4 1000 1125 1250 1375 Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. DIR 1000719R0001 (L4099) Publication 140G-IN076A-MU-P - April 2013 Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.