Error Indications; Technical Description - Alesco A80 Manual Del Usuario

ERROR INDICATIONS

If the induction heater gets too hot, overheat warning turns on and the induction heater stops
working. Use the external water-cooling system to cool down the machine.
See picture 7
Overheat warning
If the water flow is obstructed or the cooling fluid is not enough in the water tank the flow warning
turns on. Make sure that the water level is ok and hose package is not obstructed.
See picture 8
Flow warning
If the general hardware fault warning turns on, unplug the induction heater from the wall socket
and reconnect. If the induction heater still signal general hardware fault, contact your reseller or
Alesco International AB direct.
See picture 9
General fault

TECHNICAL DESCRIPTION

Power:
Equipment:
Frequency:
Rated voltage AC:
Ambient temp.:
IP code:
Weight:
Dimensions:
Water tank
Hose package
Max pressure
Accessoryconnector
WARNINGS AND IMPORTANT INFORMATION
Important! Use only Alesco International AB approved accessories and spare parts.
Important! If the attached external water hoses are replaced make sure to not reuse
the old ones.
Important! The induction heater is designed to have a high degree of recyclability.
However, it can contain substances which should not be thrown out with normal garbage.
Contact Alesco International AB for information about environmentally handling.
Important! The equipment and its components may not be modified without the prior
written permission of the manufacturer. The user of the equipment is liable for all technical
failures caused by incorrect use, incorrect maintenance, damage, incorrect repair or
modification by a party other than the manufacturer or specified by the manufacturer.
Warning! All service and maintenance work must be carried out by Alesco International
AB's service personnel. Risk of electric shock.
Warning! Remove no cover plates or carry out work on the induction heater without
disconnecting it from the mains supply. Risk of electric shock.
3,7kW
Group 2 Class A
15kHz - 40kHz
180-245VAC, 50-60Hz
0 C to +40 C
21
12-16kg
135x30x50mm
7 litres
1,7M
2,000e5 Pa/2 Bar
12V/0,5A
5