Taurus Comfort Therm UB 81 Manual De Instrucciones página 7

take the appliance to an authorised te-
chnical support service. Do not attempt
to disassemble or repair the appliance
by yourself in order to avoid a hazard.
- When not in use store as explained in
Cleaning.
- Ensure that the voltage indicated on the nameplate matches the mains
voltage before plugging in the appliance.
- The appliance's plug must fit into the mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- Do not leave the appliance out in the rain or exposed to moisture. If water
gets into the appliance, this will increase the risk of electric shock.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
- Do not use the appliance near bathtubs, showers or swimming pools.
- Never use the electric wire to lift up, carry or unplug the appliance.
- Ensure that the electric cable does not get trapped or tangled.
- Do not allow the connection cable to come into contact with the appliance's
hot surfaces.- Check the condition of the electrical connection cable.
Damaged or tangled cables increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if the on/off switch does not work.
- Disconnect the appliance from the mains when not in use and before under-
taking any cleaning task.
-For all night use or continuous use, please set the switch button to "1. Do not
set the switch button to "2" or "3" for all night use or continuous use.
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Instructions for use
Use:
- Lay the electric blanket flat on the bed. The end with no control is the foot
of the bed.
Only spread sheets or thin cotton-padded mattress on the blanket.
-Make sure they are laid flat to help conduct heat and to be able to see whether
the electric
blanket is uneven. With everything flat on the bed the electric blanket can be
used safely.
- General temperature adjustment:
- Connect the appliance to the mains before bedtime.
- Push shift button to "3 ", the power indicator lamp glows, and the electric
blanket will begin to heat.
-Normally, preheat for 30-50minutes, then the shift button can be moved to "2"
or "1" according to individual needs so as to keep it at a warmer temperature
when falling asleep, or to "0" to stop heating completely (the power indicator
lamp goes out). If you intend to use the blanket all night long or use the blanket
continuously, please push the button to "1".
Dual control: Equivalent to two single beds combined. Two people can adjust
according to their own needs without interfering with each other.
When the electric blanket runs, the control must be uncovered in a position that
is easy to access. Ensure not to put the control under the quilt, pillow, or cove-
red by other things. Do not leave the control close to any other heat source in
case the control is overheated and damaged.
Once you have finished using the appliance:
- Turn the appliance off, shifting the button to "0".
- Unplug the appliance to the mains.
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the appliance's control with a damp cloth with a few drops of detergent
on it and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- If you want to clean the electric blanket, first disconnect the product from
power and ensure the electric blanket is off work and in room temperature, then
put it on flat surface, you can use damp cotton to wipe the surface of blanket.
- After finish cleaning, put the electric blanket in a cool and airy place and it
must be completely dry before use.
Manual UB81-141.indb 7
When not in use, store as follows:
• When not in use, the electric blanket should be stored in a dry place. When
storing the appliance, allow it to cool down before folding.
• Do not crease the appliance by placing items on top of it during storage.
• After storing, the blanket should be carefully checked before use to make
sure the control and cords are safe. Do not power on when the blanket is not
totally safe.
Anomalies and repair
- Take the appliance to an authorised technical support service if product is
damaged or other problems arise. Do not attempt to disassemble or repair the
appliance yourself as this may be dangerous.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included
in a collection, classification and recycling system. Should you wish to dispose
of them, use the appropriate public recycling bins for each type of material.
- The product does not contain concentrations of substances that could be
considered harmful to the environment.
This symbol means that in case you wish to dispose of the product
once its working life has ended, take it to an authorised waste agent
for the selective collection of Waste from Electric and Electronic
Equipment (WEEE).
This symbol means that user must to consult instructions
thoroughly before use.
Do not insert pins
Do not use folded or rucked
Not to be used by very young
children (0 – 3 years)
Do not tumble dry
Do not iron
Do not dry clean
Do not wash
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EC on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.
30/7/15 18:27