On cleaning
Clean this product with a soft dry
cloth. If it is heavily soiled, clean this
product with a soft cloth slightly
moistened with a mild detergent
solution, and then wipe it with a dry
cloth.
Avoid the following to avoid
damage to the finish:
– Using chemicals such as thinner,
benzine, alcohol or insecticide.
– Leaving the casing in contact with
rubber or vinyl objects for a long
period of time.
When using chemical cloths, follow
the warnings.
Specifications
Communication system
TransferJet Specifications
PHY-CNL Spec.Rev.1.0
Compliant
PCL Spec Rev.1.0 Compliant
Frequency band
4.48 GHz (central frequency)
(4.20 GHz - 4.76 GHz)
Supported protocol class
(communication type or tool)
SCSI Block Device Initiator*
External interface
USB2.0 (High-Speed)
Dimensions (w/d/h)
Approx. 110 mm × 62 mm ×
16 mm
(4
/
in. × 2
/
3
1
8
Mass
Approx. 100 g (3.5 oz) (excluding
cable)
Operational temperature
0 °C - 40 °C (32 °F - 104 °F)
Power supply
DC 5 V, 0.25 A
(supplied from USB)
* This product can communicate with
a TransferJet technology compatible
device of SCSI Block Device Target
protocol class.
Design and specifications of this
product are subject to change without
notice.
Supplied items
TransferJet Station (1), USB cable
(length: approx. 0.5 m (1.6 ft)) (1),
Operating Instructions (this manual)
(1)
in. ×
/
in.)
21
2
32
US
1
US