Getting Started - Sony TransferJet TJS-1 Manual De Instrucciones

Getting started

Before use, connect the supplied USB cable to the bottom of this product, and
then connect the USB cable to a device, such as a PC.
Bottom
Notes
 Use the supplied USB cable.
 When connecting to a PC, connect the USB cable to the USB port of the PC directly.
Operation during connection via a USB hub is not assured.
 If using a Windows PC when disconnecting a USB cable from a PC, click the icon
remove USB Mass Storage Device] at the bottom right of the desktop of the computer, then
unplug the USB cable. The screenshots are from Windows Vista. Screen and operation
procedure may vary depending on the operating system of the computer.
6
US
O N
Mode Switch
This switch is for future expansion. Before using
this product, check the switch is set to "MODE 1"
(factory default).
[Safely