Maintenance And Care; Noise And Vibration; Declaration Of Conformity - Casals V@MTLI108 Instrucciones De Servicio

ACCESSORIES
Accessories and their corresponding order number can
be found in our catalogues.

MAINTENANCE AND CARE

- Clean the machine very carefully after each use. The
air vents should always be kept clear.
- Store in a dry place, away from cold .
- Use only Casals accessories and spares. These
should be fitted in a Casals technical service
centre (See Warranty/Technical Service Centre
address leaflet).
Do not dispose of electric tools in
the household waste!
In accordance with European Directive 2002/96/EC
relating to old electrical and electronic appliances and
its translation into national law, used electric tools must
be collected separately and recycled in an ecologically
desirable way.
WARRANTY
See general warranty conditions printed on the at-
tached sheet.

NOISE AND VIBRATION

This tool has been designed and made to reduce noise
to a minimum. However, in spite of this, in certain
circumstances the maximum noise level in the
place of work could exceed 85 dBA. In this case,
the operator should wear ear protection.
The machine's noise and vibration levels, measured in
compliance with EN 60745, usually reach:
Acoustic pressure = 61 dB(A)
Sound-power level = 72 dB(A)
Use ear protection!
Vibration acceleration < 2.5 m/s

DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibility,
that the CASALS brand products V@MTLI108
described in this manual comply with the follow-
ing standards or standard documents: EN 50260,
EN 55014 (for battery-operated tools) or EN
60335, EN 55014 or EN 55011, EN 61000-3 (for
battery chargers), in accordance with EU Direc-
tives 73/23/EC, 89/336/EC and 98/37/EC.
07
Ernest Casals
Laboratory Mgr.
Talleres Casals, S.A. Ripoll (Spain) 06/2007
We reserve the right to make technical changes
All manuals and user guides at all-guides.com
2
José Ramón Córdoba
Plant Mgr.