P-4
Connection procedure (continued)
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a stereo amplifi er.
Refer to the user's manual of the stereo amplifi er for details. (Cables shown in the fi gure below are commercially available.)
•
To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an audio cable (RCA). Connect the connectors of the
audio cable (RCA) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the monitor or
the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [S-VIDEO] using the INPUT
button on the monitor or the S-VIDEO button on the wireless remote control.
•
To connect two monitors, connect one end of a BNC cable to the VIDEO OUT connector of the fi rst monitor and the other end to
the VIDEO IN connector of the second monitor.
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
•
When connecting a stereo amplifi er to the monitor, be sure to turn off the power of the stereo amplifi er. For connection to the
audio output connector on the monitor, use an audio cable (RCA). Connect the connectors of the audio cable (RCA) correctly. Be
sure to turn on the monitor fi rst, and then turn on the stereo amplifi er.
•
The selected audio input signal is output from the AUDIO OUT connector.
Stereo amplifi er
External speakers
Video device
(composite video/S video device)
To S video output
To video output
To audio output
All manuals and user guides at all-guides.com
VIDEO IN
Audio cable (RCA)
To audio input
BNC cable
S video cable
BNC cable
Audio cable (RCA)
English-21
LCD monitor (second monitor)
LCD monitor (fi rst monitor)
AUDIO OUT
VIDEO OUT
S VIDEO IN
VIDEO IN
AUDIO IN2