Stanley Bostitch D31AD-E Especificaciones Técnicas página 6

STAPLE LENGTH ADJUSTMENTS
This tool comes supplied for use with 38mm staples for stapling two thicknesses of triple flute board. The adjustment plate
can be moved to achieve different levels of penetration varying on the total thickness of the boards. Loosen the nuts (Fig 5)
and adjusting the plate as shown in the table below. If adjustments do not give a satisfactory clinch, alternative clinchers
may needed to be fitted and adjustments made in accordance with the following table.
Note: Additional clinchers are not included and should only be fitted by the authorized agents of Bostitch or by other
experts, giving due regard to the safety, operating and maintenance instructions in this manual, the Safety and Operating
Instructions Manual and in the Tool Technical Data.
Staple Leg
Length
25mm
28mm
32mm
35mm
38mm
Technical Data:
Please look for the technical data in the table marked ? at the end of this manual.
A Length mm.
B Height mm.
C Width mm.
D Weight Kg.
E Noise L , 1s, d
PA
F Noise L , 1s, d
WA
G Noise L , 1s, 1m
PA
H Vibration m/s
2
I P max Bar
J P min Bar
All manuals and user guides at all-guides.com
Anvil Adjusting Plate
Size
25
32
38
K Air consumption per shot @ 5.6 Bar
L Activation type
M Summer lubricant
N Winter lubricant
O O-ring lubricant
P Fastener Name
Q Dimensions mm.
R Head/crown
S Magazine capacity
T New Driver Length mm.
U Max. Depth Inside Piston mm.
Position
5
4
5
4
6
Penetration
Depth
15mm
15mm
18mm
18mm
24mm