SATA clean RCS Instrucciones De Servicio página 49

Operating instructions SATA clean RCS
All manuals and user guides at all-guides.com
9. Replacing wear-and-tear parts
Replacing the cleaning brush
1. Loosen the Allen screw (key size 3) - (a)
2. Remove cleaning brush (8)
3. Insert new cleaning brush (8) until bedstop
4. Tighten Allen screw (a)
Replacing the anti-splash system
1. Loosen the fi xing rivet (13)
2. Remove the anti-splash system (6)
3. Insert new anti-splash system (6) along with
fi xing rivet (13) in correct position.
In case of functional faults, the control module can be removed completely from the
bottom part (without having to disconnect the bottom part from its fixing place), and
sent to SATA resp. an authorized distributor for repair work.
10. List of spare parts and accessories:
1. Cleaning brush (Order No. 147017)
2. Pack of 5x anti-splash systems and
5x fi xing rivets, (Order No. 146993)
3. 2x hose (for cleaning resp. dry-blowing
device), (Order No. 147025)
4. Repair kit (1x brush, 2x anti-splash
system, 1x fi xing rivet, 2x hose),
(Order No. 146985)
5. Air hose 0.5 m with fi ttings on one side
G1/2, (Order No. 146514)
6. Nipple G1/4 (Order No. 53942)
7. SATA quick coupling G ¼ ext.
(Order No. 13623 )
8. SATA quick coupling G 3/8 int.
(Order No. 13581)
9. Fixing kit (Order No. 146357 )
10. Gun holder (Order No. 9886)
11. Grounding cable, length 3 m
(Order No. 147082)
12. Tefl on ball tap G ½ ext.
(Order No. 10934)
13. Pack of 5 closing caps (USA/Canada)
(Order No. 148536)
14. Pack of 5 closing plugs (USA/Canada)
(Order No. 148544)
(6)
(13)
(8)
1 2
4 5
7 8
10
11
13 14
(a)
3
6
9
12
VIII.5