Operating Instructions - SATA clean RCS Instrucciones De Servicio

Operating instructions SATA clean RCS
All manuals and user guides at all-guides.com
Preface
Prior to putting the unit/paint spray gun into operation, read the operating instructions completely
and thoroughly. The stipulations contained therein are to be respected in any case. After that,
the operating instructions are to be stored in a safe place, accessible for every user of the equipment.
The unit/paint spray gun may only be put into operation by persons familiar with its use (professio-
nals). Inappropriate use of the unit/paint spray gun, modification of any kind or combination with
inappropriate other parts may cause material damage, serious hazard to the user's, other person's or
animal's health or even death. SATA shall not take any responsibility for such damages (e.g. failure
to respect the stipulations laid out in the operating instructions). The applicable safety, workplace and
worker health protection regulations of the respective country or area/district in which the system/the
paint spray gun is used are to be respected in any case (e.g. the German Rules for the Prevention of
Accidents BGR 500 (BGV D25) and BGV D24 issued by the Central Office of the Professional Trade
Associations, etc.). For the sake of health protection safety clothes and protective gear, such as
goggles, should always be worn when handling chemical substances. SATA, SATAjet, the SATA
Logo and/or other SATA products referenced herein are either registered trademarks or trademarks
of SATA GmbH & Co. KG in the U.S. and/or other countries. The names of companies and products
mentioned herein may be the trademarks of their respective owners.
1. Features and technical Data
SATA clean RCS cpl. with integrated cleaning and dry-blowing unit, anti-splash system and brush for
cleaning the air cap.
• Air consumption Cleaning:
• Air consumption Drying:
• Cleaning agent consumption
per cleaning process:
• Cleaning time per colour change:
• Drying time per colour change:
• Operating pressure:
• Dimensions:
• Weight:
2. Construction
The figures in brackets refer to the illustration on the fold-out cover page at the back of this
brochure.
(1) Deposit surface / Lid
(2) Air inlet G ½ ext. (G ¼ int.)
(3) Air outlet G 3/8 ext. (G ¼ int.)
(4) Functional switch Cleaning / Drying / Spraying
(5) Button „Drying"
(6) Anti-splash system
(7) Cleaning nozzle
(8) Cleaning brush
(9) Dry-blowing nozzle
(10) Cleaning agent suction hose
(11) Closing fl ap
(12) Gun holder (optionally available as an accessory - can be mounted on the right and/or left
side of the appliance)
(13) Fixing rivet
(14) Drilling for fi xing the grounding cable
(15) Runoff plate (not visible)
approx. 140 Nl/min / 4.9 cfm
approx. 130 Nl/min / 4.6 cfm
approx. 140 ml
approx. 21 sec.
approx. 4 sec.
min. 6 bars (87 psi) / max. 8 bars (116 psi)
310 mm x 225 (180) mm x 710 mm
approx. 9,6 kg (without container)
VIII.1