SATA clean RCS Instrucciones De Servicio página 50

Operating instructions SATA clean RCS
All manuals and user guides at all-guides.com
11. Guarantee conditions
Warranty in so far as the supplier has taken over a manufacturer's guarantee as stated
in the offer.
a) The supplier grants a guarantee period of 12 months for this kind of equipment;
the guarantee period begins on the date of sale to the final customer.
b) The guarantee covers the material value of components with manufacturing and material
faults which are detected during the guarantee period. The guarantee does not cover any
damage caused by incorrect handling, normal wear or mechanical damage.
c) Any other further claims of any sort lodged against the supplier, particularly claims for dama-
ges, are ruled out. This also applies to damages caused during consultation talks, instruction
sessions and demonstrations. The final customer's rights vis-à-vis his contracting partner
remain unaffected.
d) If the customer requires immediate repair or replacement before ascertaining whether we as
suppliers are obliged to provide replacement, the replacement delivery or repairs are provided
and will be invoiced and paid according to the currently valid price. If further verification of the
complaint reveals that the customer is entitled to claim under the guarantee, the purchaser
shall receive a credit note corresponding to the guarantee service provided for the invoiced
repair or replacement delivery. Components for which replacements have been delivered
become the property of the supplier again. Notifications of faults or other complaints do not
entitle the customer or his representative to refuse or delay payment.
e) The unit is to be returned with transport costs paid. The supplier does not assume any costs
for delegating engineers (travelling time and costs) together with freight and packaging costs.
The supplier's conditions for the delegation of engineers apply here.
f) Any services provided under the guarantee do not prolong the guarantee period.
g) The guarantee becomes null and void in the event of any third-party interference.
h) The guarantee conditions are an integral part of the supplier's general conditions of delivery.
SATA can not be held responsible for injuries caused by non-observance of the operating
instruction.
Subject to technical alterations.
Caution! When using solvents and cleaning agents based on halogenated hydrocarbons e.g.
1.1.1-trichlorethylene and methylene chloride, chemical reactions can occur on the aluminium
cup, gun and galvanized components (small quantities of water added to 1.1.1-trichlorethyele-
ne produce hydrochloric acid). This can cause oxidation of the components; in extreme cases,
the reaction can be explosive. Therefore, only use solvents and cleaning agents for your paint
gun which do not contain the substances named above. You must never use acid, alkaline
solutions / lye or stripping agents for cleaning.
12. CE Declaration of Conformity
The SATA gun quick cleaning appliance has been developed, constructed and manufactured
in accordance with the CE Directive for Machines 98/37/EG including annex corresponding
to the ATEX Product Guideline 94/9/EG Appliance Group II / Category 2, and the European
Standards EN ISO 12100-1:2001, EN ISO 12100-2:2004, EN 12921-1:2005, EN 12921-2:2005.
The technical documentation is complete, and the Operating Instructions belonging to the gun
quick cleaning appliance are available both in their original version and in the respective user's
national language.
VIII.6
SATA GmbH & Co. KG
President
Albrecht Kruse