Dépannage - Antec Mobile Products Pulse Manual Del Usuario

Dépannage
PROBLEM
The device is malfunctioning or
not turning on
Distortion or poor sound
quality
The pulse is not emitting any
sound
The pulse is not pairing with
the Bluetooth-enabled device
Voice dial does not work
• Visitez http://www.antec.com/?page=support# pour le support technique
EN
All manuals and user guides at all-guides.com
SOLUTION
• Check for a good connection to the audio device
• Ensure that both the pulse and the audio device are fully
charged
• Increase the volume on your phone or device
• Reconnect the pulse to your device using the provided
3.5 mm cable
• Increase the volume on the pulse
• Increase the volume on the audio device
• Make sure neither device has been muted
• Check the charge of the pulse and the audio device
• Re-pair the device
• Make sure both devices are on and fully charged
• Re-pair the pulse or move closer to the Bluetooth device and
attempt to re-pair
Please check that your mobile device supports hands-free or
voice dial functions