Hansgrohe Talis Elegance 15090000 Instrucciones De Montaje página 31

Important! The mixer must be connected to
angled or straight isolation valves with integrated
filter. The mixer can not used together with a
continuous flow water heater.
Important! The fitting must be installed, flushed
and tested after the valid norms!
The hot and cold supplies must be of equal
pressures.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow:
Flow duration:
Factory preset:
10
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 80° C
65° C
6 l/min 0,3 MPa
1 – 39 sec.
ca. 10 sec.
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com
Operation
To activate the mixer, push the handle. The
mixer shut off automaticaly after the preseted
time. A manually shut off is not possible.
Turn the handle to the left = cold water,to the
right = hot water (only 15090000).
Spare parts see page 2 + 3
1 handle
2 cartridge cpl.
3 cartridge cpl.
4 aerator
5 fixing set
6 connection hose
7 back flow preventor cartridge
8 handle
9 cartridge cpl.
10 fixing set
11 connection hose
96663000
96665000
96661000
96788000
96016000
96666000
96906000
96662000
96664000
94702000
96667000