Installation Steps; Care And Cleaning - LUND AVS Bugflector Instrucciones De Instalación

Installation Steps

Install (6) screws with washers.
3
Turn both of the hood bumpers counter clockwise
5
Apply bump ons to surface of hood
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
hood shield
screw
1 1/2 turns.
800-241-7219 • Visit us at lundinternational.com
© 2014 Lund International, Inc. All rights reserved.
, the Auto Ventshade
TM TM
seal
4
washer
6
Lund International
logo and the AVS logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Tighten all (6) screws until snug to secure
hood shield to hood.
NOTE: DO NOT OVER TIGHTEN
Close Hood.