Tommee Tippee closer to nature perfect prep machine Manual De Instrucciones página 6

How to use the Perfect Prep machine
6
Before each use you must ensure that your water tank is above the minimum fill mark.
Always use cold water when filling the water tank, other than when cleaning.
Check the water level and
regularly top up when
necessary with COLD WATER.
When filling the tank, you must
always fill the hopper and as
the water regularly passes
through the filter you can
regularly top it up.
The light will change to solid red
and there will be a double beep
to indicate the end of the first
stage. You will need to make up
your feed within 2 minutes.
Turn the dial to select the
feed size you require
(4fl oz –11fl oz).
Carefully remove the bottle from
the stand and measure the
correct number of formula
scoops into the bottle.
Position your sterilised
bottle under the dispenser
outlet. Adjust bottle stand if
necessary (bottle neck
should sit close to the
dispenser outlet).
Screw the sterilised milk
storage lid onto the bottle
and ensure that the lid is tight.
Be careful when handling hot
liquid.
Press the start / stop button.
A red light will flash and a
volume of HOT WATER
(hot shot) is dispensed
into your bottle.
Shake well until the formula
powder has dissolved.