Publicidad
Idiomas disponibles
Idiomas disponibles
BN, BA DigiAlbum 0410.qxd
Using the AC adapter
This Album can be powered by AC through the supplied switching power AC adapter.
Connect the AC adapter to the Album as illustrated below.
Note:
• Always turn off the Album before connecting or disconnecting the AC cable.
• Only use the AC adapter supplied with this Album. Using a different type of adapter
may cause malfunction or damage the product.
• When the AC adapter is used for a prolonged period of time, the adapter may heat
up. This is normal and no reason for concern.
• When the adapter is not used, unplug it from the outlet.
Charging the battery
1. Use the AC adapter to charge the battery. Connect the AC adapter as illustrated
above.
2. Slide POWER to OFF (the Album must be turned off to charge the battery).
3. The charging starts and stops automatically when the Album is fully charged.
LED indicator
1. During charging, the red and green LEDs blink alternatively.
2. When the battery is fully charged, the green LED stays lit.
3. When the Album uses battery for power, steady green LED lights.
If the battery power is low, the green LED blinks.
Viewing photos
1. Slide POWER ON/OFF to ON. The
power indicator illuminates, and the
Album starts the slideshow automati-
cally.
2. Insert your memory card into the
SD/MMC/MS/xD slot and press EXIT
to display the memory devices.
3. Use PREVIOUS or NEXT to select the
4-in-1 card slot or internal memory.
16.04.2010 9:56 Uhr
All manuals and user guides at all-guides.com
E N G L I S H
10
Seite 10
To home
power outlet
Publicidad
