Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
No.
1
Sensor gear alignment tool
2
Screw for camshaft locking tool
3
Inlet camshaft locking tool
4
Exhaust camshaft locking tool
5
Pre-tensioning tool
6
Flywheel locking pin
7
Camshaft alignment tool
8
Crankshaft locking tool
INTENDED USE
This tool set is made for checking and adjusting the engine timing and Vanos unit on BMW engines N42 /
N46 / N46T.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to the
vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the timing
again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for BMW N42 / N46 / N46T
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8834
to be used as OEM
11 9 350
11 9 293
11 9 292
11 9 291
11 9 340
11 5 120
11 9 270
11 9 190
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
