Ribimex Ribiland PREHLS52 Manual De Instrucciones página 27

Fig.8a: PREHLS52 / 042001
Fig.9 : PREHLS7T / 042011
4.4- Maximum pressure limiting device
4.4.1- For PREHLS52 / 042001 and PREHLS7T / 042011
DO NOT ADJUST THE MAX PRESSURE LIMITING SCREW!
Maximum pressure was set before the log splitter left the factory and the maximum pressure limiting
screw is sealed with glue to ensure the log splitter works under pressure no more than 4T, 5T or 7T.
The setting was done by qualified mechanics with professional instruments.
Unauthorized resetting will cause the hydraulic pump fail to output enough splitting pressure or
result in serious injury as well as damage to the machine.
Fig.11: PREHLS52 / 042001 ; ; PREHLS52/5 / 042031
(15) Maximum pressure limiting screw
4.5- Moving the Log Splitter
The log splitter is equipped with 2 wheels for minor moving.
Make sure the oil tank cover is securely tightened.
To move the log splitter to the work area, grip the handle to tilt the log splitter slightly.
The wheels are not intended to transport or tow the log splitter over long distance.
Do not tow on open road.
Fig.8b: PREHLS52/5 / 042031
Fig.10 : PREHLS7T/V / 042021
Fig.12 : PREHLS7T / 042011