Urmet Sinthesi Steel 1083/64 Manual Del Usuario página 22

DOOR UNITS CONFIGURATION
Default settings: default indoor station settings are:
PE type:
Secondary number:
Door opener:
Interruption:
Guaranteed conversation time rotary:
Door lock release rotary:
Door unit number:
Camera LED on (if connected):
ID:
door unit number
Set a number from 0 to 3 if the door unit is a main unit (v. AUX) or from 0 to 31 if the door unit is a secondary
unit as shown in the following fi gure.
• There must not be two main stations with the same ID. Two secondary stations may coexist with the
same ID but with different address (v. AUX).
• The ID of the secondary door unit must coincide with the column ID set in the column interface 1083/50,
if present.
22
ID
0 0
CONV
TIME
AUX
O N
=
DOOR
TIME
main
0
free
Not assured
30 s (pos 3)
1 s (pos 0)
0
on
O N
=
DS1083-058B