Garage Door Lock Management; Technical Specifications - Urmet Sinthesi Steel 1083/64 Manual Del Usuario

GARAGE DOOR LOCK MANAGEMENT

The doors have two terminals connected to the contacts of a normally open relay which can be used to
control a gate opening control unit (1). The relay is operated for 1 second after receiving the garage door
opening command according to the operating mode ("free" or "privacy") as the door lock.
(1) The relay is not suitable to control direct power loads and can only be used as control relay. Refer
to the calling station manual for electrical features.
ILA
Audio repeater device for deaf people driving, in compliance with european law.

TECHNICAL SPECIFICATIONS

Direct current power voltage (LINE): ............................................................................................. 36 – 48 V
Stand-by consumption: ....................................................................................................................45 mA max
Max. consumption (call in progress and name tags on): ...............................................................250 mA max
Name tag light: ....................................................................................................................................... 32 max
Lock output SE+ and SE-:........................................................................................22 – 24 V
Working temperature range:..........................................................................................................-10 ÷ + 50 °C
DS1083-058B
max 240 mA
31