Whirlpool SW8 AM1Q X 1 Guia De Inicio Rapido página 22

Read the Instructions for Use carefully before using
the appliance.
13
14
1. Fan*
2. Electronic control panel / light unit
3. Multi-flow cold air area*
4. Bottle rack *
5.
Sensor cover
6. Area shelves
7. Rating plate with commercial name
8. Fruits and vegetables crisper
9. Crisper divider*
10. Door reversibility kit*
11. Egg tray*
12. Bottle separator*
13. Door trays
14. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second. The default (factory) values of the
fridge compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary from
model
QUICK START GUIDE
Indicator LEDs to display the current temperature setpoint or the Fast Cooling
function.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light, allowing a
better lightning as well as a very low energy consumption.
If the LED light system does not work, please contact the Service to replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more then 8 minutes the
light will be automatically switched off.
6 SENSE FRESH CONTROL
th
This function automatically works
to ensure the optimal conditions
to preserve the stored food.
FAN
The Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is switched on.
Fan deactivation/reactivation: Fan is active by default.
To deactivate/reactivate the fan follow the process described below:
- Push the Light Button as indicated in picture 2: the light will switch off;
- Without releasing the Light button, keep pressed the Temperature button too as indicated in picture 3: the light will blink once if the fan has been deactivated (OFF) , or it will blink
three times if the fan has been activated (ON).
Note: Deactivation of the fan switches off function 6th Sense Fresh Control in the fridge.
ALARM TYPE Signal
Door open alarm Refrigerator Light blinks
Door open alarm Refrigerator Light OFF
Malfunction Any temperature indicators blinks
AE NL FR GR
BG CZ DK FI DE HU
ON/STANDBY button.
TEMPERATURE button
Led ON Led ON Led OFF Led OFF
FAST COOLING function
The use of the Fast Cooling function is recommended:
- to increase the cooling capacity of the refrigerator compartment
when placing a very high quantity of food within it,
To activate the Fast Cooling function, press the Temperature
button cyclically on the control panel till all the 3 LEDs blink and
remain on.
The function is automatically deactivated after 6 hours and return
to previous selected set point. The function can be manually
deactivated by press Temperature button on the control panel.
ALARMS TABLE
Cause
The door has remained open for more than 5 minutes.
The door has remained open for more than 8 minutes.
Product malfunction.
PT SK ES SE
IT KZ NO PL RO RU
ON/STANDBY function TEMPERATURE setting
Press the Temperature button on the control panel to adjust
To put the product in Stand-by,
press and hold the On/Standby the temperature from the warmest through the lower to the
button for 3 seconds. All the coldest level.
Pressing the Temperature button, the temperature setting will
temperature indicators turn off.
Press again to reactivate the change cyclically.
At first plug-in of appliance temperature setpoint is present at
appliance. (see the Instructions
medium position (factory setting).
for Use)
Following table shows temperature setpoints:
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Led ON Led ON Led OFF Led OFF
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator.
Cure
Close the door
Close the door
Contact the After-sales Service
UA GB
EN
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Fast Cooling
195157393 00