Publicidad
Idiomas disponibles
Idiomas disponibles
SETTINGS MENU
1. Press the SET button to enter the setting mode and the setting order
will start with the hour:
Minute "
Hour
Language (English, German, French)
2. Press the + or the – button to adjust values during setting mode. Hold
the + or the – button to quickly adjust setting values.
3. Press the SET button to confirm and move to next item or exit.
Note: your clock will exit the settings menu when no further buttons are
pressed for 10 seconds.
TEMPERATURE DISPLAY
The temperature shows on the lower right side in Celsius temperature.
AUTOMATIC LIGHT SENSOR
Your clock is equipped with an automatic light sensor at the top of the front
case. The brightness of backlight will be adjusted to lower level when your
room environment is dim.
Note: Please keep your clock at least 60-cm distance away from any
objects on top.
TROUBLE SHOOTING
If your clock displays wrong time or does not function properly, which
maybe caused by electro-static discharge or other interference. Unplug the
DC jack at the back of the unit, slide open the battery cover and take out the
batteries. Then re-plug the DC jack and reinstall batteries by observing the
correct +/- polarity. Your unit will be reset to default settings and you need
to set it again.
CARE OF YOUR PRODUCT
1.
Place your unit on a stable surface, away from sources of direct
sunlight or excessive heat or moisture.
12/24 hour time display
EN3
Year
Month
Date
Publicidad
