Low Match; Room Compensation; High Match; Power Mode - Phonic P5A Manual Del Usuario

1. LOW MATCH

switch tells you the crossover frequency points. While
use this unit with a subwoofer, you can select a suit-
able frequency to match the additional subwoofer.
2. ROOM COMPENSANTION
User can alter the output volume of woofer depending
on its setup position. Positioned real close against the
wall, this unit will have stronger low frequency. It is
necessary then, to set the level of the low frequency
output at -2dB to achieve the best balance between
high and low frequency. When located at the corner,
it is suggested to set this level at -4dB. Basically, the
longer distance your monitor is to the wall, the more
you need to boost this bass gain.

3. HIGH MATCH

Use this to adapt the speaker' s frequency response
to the damping characteristics of the control room.
5
6
All manuals and user guides at all-guides.com

4. POWER MODE

You can use this switch to select between "ON",
"AUTO ON" , and "OFF" . When set to OFF, this unit
is compelety switched off and cannot be activated by
the power switch. When the switch is set to AUTO
ON, this unit will automatically operate as soon as
a signal is sent to its input. On the other hand, this
unit will automatically deactivate when the signal is
is set to ON, this unit is activated all the time and can
be turned off only by the power switch.

5. INPUT CONNECTORS

for users to connect various ouput devices to the P
Series Studio Monitors.
P5A / P6A / P8A