i-tec USB 3.0 Manual De Instrucciones página 8

EN USB 3.0/USB-C/Thunderbolt 3 Dual Docking Station HDMI DVI + VGA
For Windows 7/8/8.1, download the drivers from our website www.i-tec.pro under
the "Download" tab for this product. Start the installation from the downloaded
file, select the installation language and follow the on­screen instructions.
In Windows 10, the dock can be connected directly, the drivers are automatically
installed from the system if connected to the internet.
Note: In Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user.
The screen may flash during driver installation, this is a standard process. We
recommend restarting your laptop/tablet after the installation is complete.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO
THE LAPTOP/TABLET)
1. Turn on the laptop/tablet and connect the power adapter to the docking station.
2. Plug the docking station power adapter into a 110V/230V AC power outlet
and press the ON button.
3. Plug the USB 3.0 to USB 3.0 cable or USB 3.0 to USB-C cable into the USB-B
3.0 port on the rear panel of the docking station.
4.
Plug the other end into a free USB 3.0 / USB-C / TB3 / TB4 port on your
laptop / tablet.
5. This will then start the automatic installation of the ports on each system.
6. After the installation is complete, restart your laptop/tablet.
In Windows, the LAN port will appear in Start → Control Panel (View Small Icons)
→ Device Manager → Network Adapters as "USB Gigabit Ethernet". The docking
station appears in Start → Control Panel (View Small Icons) → Device Manager →
Graphical Adapters as "LAPDOCK". Audio ports can be found in Start → Control
Panel (View Small Icons) → Device Manager → Audio, Video and Game Controllers
as "USB Audio Device".
If any of these devices are marked with a yellow ! or ?, then the docking station
is not installed correctly. In this case, unplug the docking station, uninstall
the existing drivers (see chapter "Uninstalling Drivers") and reinstall the latest
drivers, which are available for download on our website www.i-tec.pro under
the "Download" tab for this product. Then reconnect the docking station to
the laptop/tablet. In case of problems, you can contact our technical support:
support@itecproduct.com.
8