Changhong EF32F868DS Manual De Operación página 16

Menu Operation
* When TV signals is Satellite.
• Auto tuning
Press the ENTER button.
Satellite Setup
■ Transponder: Press the INDEX button
to switch between the satellite list and the
corresponding transponder list.
■ ▲/▼: Press the▲/▼button to select the
satellite/transponde from the list.
■ CH+/CH-: Press the CH+/CH- button to
page up or down the satellite/transponder
list.
■ Delete: Press the red button to delete the
current satellite/transponder.
■ Edit: Press the green button to edit the
current satellite/transponde.
■ Add: Press the yellow button to add a
new satellite/transponde.
Press the ► button to configure the satellite.
■ LNB TYPE: Select the LNB type.
■ LNB Power: Select the power supply
type for the LNB.
■ 22KHz: 22KHz SWITCH. Select the 22KHz depending on the LNB type.
■ Toneburst: You can choose one of two satellites. Used to choose proper device.
■ DiSEqC1.0: You can choose one of four satellites. Used to choose proper device.
■ Motor: Sets the positioned type between DiSEqC1.2 and USALS.
When Motor is set to DiSEqC1.2 or USALS:
- Set Position: Press the ENTER button to set Position.
Move Auto: Rotates the antenna automatically.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step: Rotates the antenna in accordance with the step value. Enables the
antenna make a finer adjustment.
Goto Position: Rotates the antenna to the stored satellite position.
Goto Reference: Drive antenna to zero position.
GotoX: Moves the antenna to the location specified by Set Location.
Store Position: Stores current position as the selected positioner limit.
- Set Limit: Press the red button to set Limits to the scope of satellite antenna
rotation.
Move Continue: Rotates the antenna until the rotation has been completed or
stopped manually.
Move Step：Rotates the antenna in accordance with the step value. Enables the
antenna make a fine adjustment.
Set West Limit：Set the west limit value.
Set East Limit：Set the east limit value.
Goto Reference：Drive antenna to zero position.
All manuals and user guides at all-guides.com
13