Changhong EF32F868DS Manual De Operación página 17

Menu Operation
Disable Limit：Delete Limit settings. Allows the antenna to rotate over the full arc.
Cancel east limit and west limit.
When Motor is set to USALS:
-Set Location: Press the green button to set Location.
Location：Selects the Set Location mode.
Longitude Direction, Longitude Angle, Latitude Direction, Latitude Angle can be
adjusted when the Location is set to Manual.
Longitude Direction: Sets the longitude direction for the location.
Longitude Angle: Sets the longitude angle for the location.
Latitude Direction: Sets the latitude direction for the location.
Latitude Angle：Sets the latitude angle for the location.
■ Reset All: Satellite list, transponder list and some settings will be reset to the
default values. After reset all, you can re-set the country while Auto Tuning.
■ Quality: Display the current status of broadcasting signal.
■ Scan: Press the blue button to enter the Channel Tuning menu.
Scan mode: Selects the scanning mode of the selected satellite.
Encrypted: Scan either free or all channels.
Service Type: Select the channel type to memorise.
When setting is completed, press the ENTER button. Channel Tuning is started.
• Programme Edit
Press the▲/▼ button select items.
Press the red button to delete the channel.
Press the green button to rename the channel. (In TV mode)
Press the yellow button to move the channel. (Except DTV channels with LCN)
Press the blue button to skip the channel.
Press the button to set the favorite channel.
The CH+/CH- button can be used to select the following or preceding page.
• Channel List Transfer
You can export all current channel information (including channel number, channel
name, frequency, etc.) into the U disk, as the channel information backup for this unit.
The system will automatically create a data file to store the channel information has
been exported.
If you can not restore the initial channel information after SORT, MOVE, DEL, SKIP,
LOCK, etc. operations, you can import the channel information from the USB.
• CI Information (In DTV mode)
This function enables you to watch some encrypted
services (pay services).
Please insert CI card into the PCMCIA slot according
to the arrow on the CI card.
When the TV is initially powered on, or insert the CI card the
first time.You should wait for several minutes for reading the
CI key properly.
NOTE:
The function can only be gotten when CI slot is available.
This OSD is only for illustration and the menu options and screen format will vary
according to the Digital pay services provider.
It is possible for you to change CI (Common Interface) menu screen and service by
consulting your dealer.
Please do not insert or pull out the CI card when power on.
Do not insert or pull out the CI card frequently so as to avoid any damages of the TV
and the CI card.
During initialization of the CI card, please don't operate the TV.
All manuals and user guides at all-guides.com
14