Humanscale M/Connect 2 Guia Del Usuario página 6

Place into Grommet Hole or System Furniture Gap
1
Place the L Bracket of the M/Connect through
the grommet hole and to the desired position
NOTE: Minimum hole diameter is 3" (76 mm)
Reattach Clamps
1
Secure the lower bracket to the larger bracket reusing the two screws
Installing M/Connect onto Sliding Desk
Remove Screws
1
Remove clamp screws
Install Sliding Desk Clamp
1
Insert clamp into M/Connect, ensuring that the bridge cable passes unobstructed on the right side of the clamp
2
Loosely install clamp screws
6
④ ⑤
①
②
③